When a property changes hands or a landlord needs to know what is actually behind the walls, the paperwork starts with a licensed electrician walking through every circuit. G. E. Shears Electric handles electrical inspections, panel assessments, and installation work across Pomona for property owners, tenants preparing for a move-in, and commercial operators keeping a building up to code. What gets tested, what gets recorded, and what the report says all matter more than most people realize until they are sitting across from a buyer or a city inspector.
Pomona is a city with a wide mix of housing ages and property types, which means the work varies considerably from one address to the next. A multi-unit building from an earlier decade has different electrical needs than a newer single-family home wiring in a Level 2 EV charger. We cover both, and everything in between. The full breakdown of what we do is on the service page. This page covers what that looks like in Pomona specifically.
Pricing for electrical work depends on what the job actually involves. A straightforward outlet repair and a panel replacement are not priced the same way, and the rate for either one is confirmed on the phone before anything is scheduled. When you call, describe what you are seeing or what you need, and you get a clear answer about what the work covers and what it will cost.
What changes a quote is scope. A panel upgrade that also requires a load calculation and permit coordination is a different job than swapping a breaker. Running a dedicated circuit for an EV charger in a garage with an accessible panel is different from the same job in a building where the panel is undersized and needs room first. We walk through those details on the call so the rate reflects the actual job, not a rough guess.
We do not charge for estimates in the sense of sending someone out to look and then billing for the visit. You get the rate on the phone. If the scope changes once the electrician is on-site and finds something that was not visible from the description, that conversation happens before any additional work begins.
Not always, and when it does, the outage is planned around your situation. Replacing a single outlet or adding a dimmer switch means isolating one circuit, not shutting down the building. Panel work is different. A full panel replacement or a service upgrade requires the main breaker to come off for the duration of that work, and that window is discussed before the appointment is confirmed.
For a household with someone working from home, or a business that cannot go dark mid-day, the timing matters. We schedule around it. If a short outage is unavoidable, you know in advance how long it is expected to last and what you can do to prepare. The goal is to complete the work without disrupting more than the job actually requires.
A city the size of Pomona generates a wide range of electrical calls. Apartment buildings, commercial storefronts, single-family homes, and mixed-use properties all have different demands, and the situation that leads to a call is rarely the same twice. Here is how the work typically divides.
A dead outlet, a breaker that trips every time the microwave runs, a section of the house with no power after a storm: these are the calls that come in most often. Troubleshooting and diagnostics are the first step, and finding the fault before touching anything else is how the repair gets done right. GFCI protection failures in kitchens and bathrooms, loose connections behind outlets, and overloaded circuits all show up in similar ways. We check the obvious first and work back from there.
Older buildings in Pomona sometimes carry panels that were sized for a different era. When a property is adding load, whether from an EV charger, a remodel, or new appliances, the panel has to be able to carry it. We run load calculations before sizing any replacement, handle the permit coordination, and do not close the job until the work is checked against code. If the existing service entrance needs attention at the same time, that gets addressed as part of the same project.
New circuits for appliances, outdoor lighting, dedicated runs for major equipment, and EV charger hookups all fall here. Installation work is where the planning conversation matters most, because what looks like a simple add-on sometimes requires panel capacity that is not there yet. The service page carries the full breakdown of what we install and what each type of job involves.
An inspection produces a written record of what is in the walls, what is up to code, and what is not. For a property sale, a rental turnover, or an insurance review, that document is what the other party is asking for. We check the panel, the wiring, the devices, the grounding and bonding, and GFCI and AFCI protection coverage. The report tells you what needs attention and what can wait.
Replacing a ceiling fixture is a small job. Running new circuits for recessed LED lighting throughout a remodeled space is a larger one. Both are work we handle. Dimmer-compatible setups, under-cabinet lighting, and fixture replacements that require a new junction box are all part of the regular scope. Exterior lighting, including security lights and motion-sensor fixtures, falls here too.
Knob-and-tube wiring was standard in homes built through the early twentieth century, and properties in Pomona's older housing stock sometimes still carry it. The problem is not that it was poorly made. The problem is that it was not designed for the loads a modern household puts on it, and it lacks a ground conductor entirely. Replacement brings those circuits up to current code and removes a real fire risk.
A generator that is wired directly into the panel through a proper transfer switch cannot back-feed the utility line, which is the hazard that makes an improvised hookup dangerous. We install transfer switches for both standby and portable generators, wire the connection to the panel, and confirm the system is set up correctly before the job is closed. In a region where public-safety power shutoffs are a seasonal reality, this is work worth scheduling before the next outage.
A panel replacement is a significant job and one that requires the main power to come off for the duration. We size the replacement to the actual load, handle the permit, and coordinate the inspection. Breaker replacement is smaller in scope but follows the same standard: the right breaker for the circuit, seated correctly, and labeled.
Smart switches and dimmers are straightforward installations when the existing wiring supports them. When a switch box lacks a neutral wire, which is common in older wiring configurations, the installation requires a workaround or a circuit update. We check the box before committing to a particular device and explain the options on the call.
Same-day appointments are often available for repairs and urgent calls in Pomona. We are open every hour of every day, including weekends and holidays, so there is no waiting until Monday for something that cannot hold. A burning smell near an outlet, a breaker that will not reset, or a section of the building with no power are calls we take at any hour.
For tenants and businesses that need to stay operational, we plan the work around what the property can tolerate. A retail space that cannot lose power during trading hours gets a different scheduling conversation than a vacant unit being prepared for a new tenant. What you get is a confirmed appointment window, a rate you know before we arrive, and licensed electricians who show up ready to wire.
We are accountable to the community we work in. That means giving you a straight answer about what the job involves, not a pitch.
We cover Pomona and the surrounding communities throughout this part of Los Angeles County. If your property is in Montclair, La Verne, San Dimas, Diamond Bar, or Claremont, we can get someone out to take a look. Coverage for your specific address is confirmed on the call.
A straightforward choice for homeowners and property managers across the area, we handle the full range of residential and commercial electrical work without limiting coverage to one zip code.
Anyone weighing up a job in Pomona may want the electrical details page first.
Yes. When you call, we talk through what you are seeing and what the work is likely to require before anything is scheduled. That conversation costs nothing, and it gives you enough information to decide whether to move forward.
The more detail you can give, the more useful the call. Useful information includes the type of property, what the job involves, whether there is an existing panel on-site and its current capacity, and whether the work needs to happen outside normal business hours. We ask the right questions if something is missing.
Permit requirements depend on the scope of the work and the type of property. Panel replacements, new circuit runs, and certain installation jobs typically require a permit and inspection. We handle the permit coordination as part of the job and let you know at the time of scheduling whether a permit applies to your project and what that means for the timeline.
Yes. A hot tub requires a dedicated circuit, a disconnect within sight of the unit, and GFCI protection. We run the circuit from the panel, install the disconnect, and wire the hookup to the manufacturer's specifications. The panel has to have room for the added load, and we check that before scheduling.
Older properties often have circuits from multiple eras running alongside each other, and we sort out what each one is before touching anything. We identify which wiring is safe to leave in service, which needs to be replaced, and what the panel can support, then work through the job in a logical order.
We tell you on the call or on-site before it becomes a delay. If a part has to come in, we confirm the timeline with you and schedule the completion once it arrives. We do not leave a job in a state that creates a hazard while waiting.
Both draw enough current that a dedicated circuit is almost always the right answer. Running either on a shared circuit risks nuisance tripping and can stress the wiring over time. We size the circuit for the equipment load and run it from the panel.
We work across the full range: single-family homes, multi-unit residential buildings, commercial storefronts, offices, and mixed-use properties. Pomona has a wide mix of property ages and types, and the scope of what we handle reflects that. Call and describe the property and the job, and we will confirm what is involved and what it covers.
G. E. Shears Electric is available around the clock for electrical repairs, inspections, panel work, and installations across Pomona. Pick the date. We do the wiring. We clean up after.
Call (626) 929-3282 for a quote. The rate is confirmed on the phone, the appointment is set when you are ready, and the next step is nothing more than making the call.
Neighboring towns we serve: West Covina, Baldwin Park, Fullerton, El Monte, Whittier.
Below is a plain-language look at the electrical work we handle across Pomona and the surrounding San Gabriel Valley communities. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If a job you need is not listed here, call us and we will tell you whether it falls within our scope.
| Service | Scope of Work | Common Situations | Things to Know |
|---|---|---|---|
| EV Charger Installation | Level 2 charger circuit, 240-volt dedicated run, panel capacity assessment, garage and driveway installation | Pomona homeowners who have purchased or are planning to purchase an electric vehicle | California's EV adoption rate is among the highest in the country, and demand for this work in the San Gabriel Valley reflects that. If the panel needs an upgrade to support the charger, we handle both in one visit. |
| Dedicated Appliance Circuits | dryer and range circuits, refrigerator and dishwasher circuits, hot tub and spa circuits, workshop and garage circuits | homeowners adding a major appliance, a hot tub, or workshop equipment that needs its own protected circuit | Sharing a circuit between a major appliance and other loads is a common cause of nuisance tripping and wiring wear. A dedicated circuit eliminates both. |
| Hot-Tub Circuits | 240-volt dedicated circuit, disconnect installation, GFCI protection for spa equipment, outdoor conduit and weatherproof wiring | homeowners installing a hot tub or spa who need the electrical side permitted and inspected correctly | Hot tub wiring requires a dedicated circuit, a disconnect within sight of the unit, and GFCI protection. Code requirements for this work are specific and we handle the permit as part of the job. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, full panel replacement, fuse-to-breaker conversion, subpanel installation | older homes adding EV chargers, appliances, or remodel circuits that the existing panel cannot safely carry | We run a load calculation before sizing the replacement so the new service fits the actual demand of the home, not just a round number. |
| Whole-Home Surge Protection | panel-level surge device installation, protection for appliances and electronics, HVAC and EV charger circuit protection, wildfire outage voltage spike coverage | Pomona households with sensitive electronics, EV chargers, or concerns about grid instability during peak summer and public-safety shutoff events | A panel-level surge protector shields the entire house in one step. It catches voltage spikes from grid events and equipment switching before they reach your devices. |
| Wiring & Circuit Installation | new circuit runs, remodel and addition wiring, grounding and bonding, permit and inspection coordination | kitchen remodels, home additions, and any project that requires new circuits or updated wiring to pass inspection | Permit work is handled as part of the job. The circuit does not go into service until it passes inspection. |
| Standby Battery for Outages | battery backup circuit wiring, critical load panel setup, transfer switch installation, coordination with battery system specs | Pomona households that need power for critical loads during public-safety shutoff events or grid outages | Southern California's grid sees real stress during peak summer demand and wildfire-season shutoff events. We wire the electrical infrastructure so a battery system can carry the loads that matter most when grid power is unavailable. |
| Ceiling Fan Installation | fan and wiring installation, ceiling box upgrade for fan weight, switch and remote wiring, covered patio fan circuits | bedrooms, living rooms, and covered patios where a fan improves comfort without adding to the cooling load | A standard ceiling box is not rated for a fan's weight and movement. We install the correct rated box before the fan goes up. |
| Breaker & Fuse Repair | breaker replacement, fuse box assessment, tripped breaker diagnosis, panel interior inspection | homes with breakers that trip repeatedly or a fuse box still in service | A breaker that keeps tripping is telling you something. We find out whether the breaker itself is the problem or whether the circuit is simply overloaded. |
| Electrical Repairs & Troubleshooting | dead outlets and switches, flickering or dimming lights, burning smells near receptacles, circuit fault diagnosis | any homeowner or property manager with an electrical problem that needs a fast answer | We find the fault before touching anything else. A proper diagnostic prevents a repair that only masks a deeper wiring issue. |
| Outlet & Switch Installation | GFCI outlet installation, AFCI breaker upgrades, USB outlet installation, dimmer and smart switch wiring | homeowners updating kitchens, bathrooms, garages, or outdoor areas to current code | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. Installing it correctly means the device trips when it should and not when it should not. |
| Older-Home Rewiring | knob-and-tube removal and replacement, aluminum branch-circuit rewiring, grounding system upgrades, code compliance for older wiring | Pomona homes with original or early-era wiring that cannot safely carry modern electrical loads | Knob-and-tube and aluminum branch-circuit wiring are both common findings in the San Gabriel Valley's older housing stock. Replacement brings the home to current code and removes risks that older wiring carries under modern loads. |
| Electrical Safety Inspections | pre-purchase and pre-sale assessments, rental property inspections, code compliance reviews, panel and wiring condition reports | buyers, sellers, landlords, and property managers who need a clear picture of a property's electrical condition before a transaction or tenant move-in | In Pomona's older housing stock, inspections regularly turn up panel issues, missing GFCI protection, and outdated wiring the current owner was not aware of. Catching those items before closing is far less expensive than addressing them after. |
| Solar & Battery Backup | solar-ready panel wiring, battery backup circuits, transfer switch installation, subpanel work for added load | homeowners preparing for solar or battery storage who need the electrical infrastructure done correctly before installation day | We handle the electrical side: wiring, transfer switches, and panel work. We do not install solar panels or battery units themselves. What we deliver is a system that is wired correctly and ready for inspection. |
| Lighting Installation | recessed and LED lighting, outdoor and security lighting, under-cabinet lighting, motion sensor and landscape lighting | homeowners updating a space or adding exterior lighting for security and curb appeal | Outdoor wiring in Southern California needs weatherproof materials and proper conduit on exposed runs. We spec the right materials for the location. |
Call (626) 929-3282 and we will walk through your job, give you a clear rate, and set the appointment on your schedule.
(626) 929-3282